How to install HID conversion kit

A HID conversion kit for car includes two HID electronic ballasts, two xenon HID bulbs, a complete wiring harness and mounting hardware for HID ballasts. As follow, we share a document “how to install HID conversion kit”.

Step 1: Let's take a look at this diagram below so you will get a clear idea on how to hook up all the parts.
HID conversion kit installation
Step 2: Open the hood, locate the back of the headlight to see whether you can remove the bulbs directly. If not, you might have to remove the headlight housing in order to perform the installation.
HID coversion kit installation

Step 3: Remove the stock socket.
HID conversion kit installation
HID conversion kit installation
 

Step 4: Remove the stock headlight bulb and remember do not touch the bulb glass with your finger.
HID conversion kit installation
HID conversion kit installation
Step 5: Alright! Now take off the HID bulb from its plastic shell. Again, do not touch the HID bulb glass with your finger, but id you did, you can use rubbing alcohol to clean it.
HID conversion kit installation
HID conversion kit installation

Step 6: Put the HID bulb back to the headlight housing.
HID conversion kit installation
HID conversion kit installation

Step 7: Connect the HID bulb with the ballast.
HID conversion kit installation
HID conversion kit installation

Step 8: Connect the HID ballast back to the stock socket.
HID conversion kit installation
HID conversion kit installation

Step 9: Let's test the HID light first to make sure it lights up. If not, please turn the extension/adapter wire 180 degrees. (1) and (2) in the diagram.
HID conversion kit installation
HID conversion kit installation
HID conversion kit installation

Final: Enjoy your new HID headlights!